Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE-p9 #1: Sat Apr 16 11:38:46 EST 2005 root@scorpion.sorbs.net:/usr/obj/usr/src/sys/SCORPION Preloaded elf kernel "/boot/kernel/kernel" at 0xc07b5000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07b5244. Calibrating clock(s) ... i8254 clock: 1193200 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 863934643 Hz CPU: Intel Pentium III (863.93-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff real memory = 1073725440 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x000000003edcbfff, 1046097920 bytes (255395 pages) avail memory = 1045368832 (996 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffee0 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x84 Other BIOS signatures found: io: null: random: mem: Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 1 ACPI timer looks BAD min = 12, max = 19, width = 7 ACPI timer looks BAD min = 12, max = 19, width = 7 ACPI timer looks BAD min = 8, max = 23, width = 15 ACPI timer looks BAD min = 8, max = 23, width = 15 ACPI timer looks BAD min = 8, max = 23, width = 15 ACPI timer looks GOOD min = 15, max = 16, width = 1 ACPI timer looks BAD min = 0, max = 31, width = 31 ACPI timer looks BAD min = 8, max = 16777204, width = 16777196 ACPI timer looks BAD min = 8, max = 23, width = 15 ACPI timer looks BAD min = 0, max = 16776980, width = 16776980 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0 cpu0: on acpi0 acpi_tz0: on acpi0 pcib0: on acpi0 acpi link get: resource 7 is not an IRQ acpi link get: resource 7 is not an IRQ ACPI PCI link initial configuration: \\_SB_.ITR3 irq 0: [ 5 10 11 15] 10+ low,level,sharable 0.1.0 \\_SB_.ITR2 irq 0: [ 5 10 11 15] 0+ low,level,sharable 0.1.1 \\_SB_.ITR0 irq 0: [ 5 10 11 15] 0+ low,level,sharable 0.15.0 \\_SB_.ITR1 irq 0: [ 5 10 11 15] 11+ low,level,sharable 0.2.0 \\_SB_.INA0 irq 0: [ 5 10 11 15] 5+ low,level,sharable 0.5.0 \\_SB_.INB0 irq 0: [ 5 10 11 15] 0+ low,level,sharable 0.5.1 \\_SB_.INA0 irq 0: [ 5 10 11 15] 5+ low,level,sharable 0.5.2 \\_SB_.INB0 irq 0: [ 5 10 11 15] 0+ low,level,sharable 0.5.3 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0009, revid=0x05 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0009, revid=0x05 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00002000, size 8, enabled map[14]: type 1, range 32, base c5000000, size 24, enabled map[18]: type 1, range 32, base c4000000, size 24, enabled pcib0: matched entry for 0.1.INTA (src \\_SB_.ITR3) pcib0: possible interrupts: 5 10 11 15 ACPI PCI link arbitrated settings: \\_SB_.INA0 (references 2, priority 25185): interrupts: 11 10 5 15 penalty: 80 80 130 50080 \\_SB_.INB0 (references 2, priority 25185): interrupts: 11 10 5 15 penalty: 80 80 130 50080 \\_SB_.ITR3 (references 1, priority 12592): interrupts: 11 10 5 15 penalty: 80 80 130 50080 \\_SB_.ITR2 (references 1, priority 12592): interrupts: 11 10 5 15 penalty: 80 80 130 50080 \\_SB_.ITR0 (references 1, priority 12592): interrupts: 11 10 5 15 penalty: 80 80 130 50080 \\_SB_.ITR1 (references 1, priority 12592): interrupts: 11 10 5 15 penalty: 80 80 130 50080 pcib0: slot 1 INTA routed to irq 10 via \\_SB_.ITR3 found-> vendor=0x1000, dev=0x0010, revid=0x02 bus=0, slot=1, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xc0 (5760 ns), mingnt=0x1e (7500 ns), maxlat=0x08 (2000 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c3fff000, size 12, enabled map[14]: type 4, range 32, base 00002400, size 6, enabled map[18]: type 1, range 32, base c3e00000, size 20, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.ITR1) pcib0: possible interrupts: 5 10 11 15 ACPI PCI link arbitrated settings: \\_SB_.INA0 (references 2, priority 25350): interrupts: 11 10 5 15 penalty: 160 170 210 50160 \\_SB_.INB0 (references 2, priority 25350): interrupts: 11 10 5 15 penalty: 160 170 210 50160 \\_SB_.ITR2 (references 1, priority 12675): interrupts: 11 10 5 15 penalty: 160 170 210 50160 \\_SB_.ITR0 (references 1, priority 12675): interrupts: 11 10 5 15 penalty: 160 170 210 50160 \\_SB_.ITR1 (references 1, priority 12675): interrupts: 11 10 5 15 penalty: 160 170 210 50160 pcib0: slot 2 INTA routed to irq 11 via \\_SB_.ITR1 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base c1000000, size 24, memory disabled map[14]: type 4, range 32, base 00002800, size 8, port disabled map[18]: type 1, range 32, base c3dff000, size 12, enabled found-> vendor=0x1002, dev=0x4756, revid=0x7a bus=0, slot=3, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0080, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001800, size 8, enabled map[14]: type 1, range 32, base c3dfef00, size 8, enabled found-> vendor=0x0e11, dev=0xa0f0, revid=0x00 bus=0, slot=4, func=0 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x8086, dev=0x0960, revid=0x05 bus=0, slot=5, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0d (3250 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base c0fc0000, size 18, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.INA0) pcib0: possible interrupts: 5 10 11 15 ACPI PCI link arbitrated settings: \\_SB_.INA0 (references 2, priority 25515): interrupts: 11 10 5 15 penalty: 250 250 290 50240 \\_SB_.INB0 (references 2, priority 25515): interrupts: 11 10 5 15 penalty: 250 250 290 50240 \\_SB_.ITR2 (references 1, priority 12757): interrupts: 11 10 5 15 penalty: 250 250 290 50240 \\_SB_.ITR0 (references 1, priority 12757): interrupts: 11 10 5 15 penalty: 250 250 290 50240 pcib0: slot 5 INTA routed to irq 5 via \\_SB_.INA0 found-> vendor=0x8086, dev=0x1960, revid=0x05 bus=0, slot=5, func=1 class=05-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[90]: type 4, range 32, base 00000000, size 4, enabled found-> vendor=0x1166, dev=0x0200, revid=0x4f bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00002c00, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0105, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ida0: port 0x2000-0x20ff mem 0xc4000000-0xc4ffffff,0xc5000000-0xc5ffffff irq 10 at device 1.0 on pci0 ida0: Reserved 0x1000000 bytes for rid 0x14 type 3 at 0xc5000000 ida0: [GIANT-LOCKED] ida0: drives=1 firm_rev=1.42 idad0: on ida0 idad0: 69455MB (142245120 sectors), blocksize=512 fxp0: port 0x2400-0x243f mem 0xc3e00000-0xc3efffff,0xc3fff000-0xc3ffffff irq 11 at device 2.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc3fff000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 0000 0000 0008 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:02:a5:07:e9:25 fxp0: [MPSAFE] pci0: at device 3.0 (no driver attached) pci0: at device 4.0 (no driver attached) pcib1: at device 5.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc6f00000-0xc6ffffff pcib1: prefetched decode 0xc2000000-0xc2ffffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base c2000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xc2000000-0xc2ffffff map[14]: type 4, range 32, base 00003000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x3000-0x30ff map[18]: type 1, range 32, base c6fff000, size 12, enabled pcib1: device (null) requested decoded memory range 0xc6fff000-0xc6ffffff found-> vendor=0x1002, dev=0x4756, revid=0x7a bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) pci0: at device 5.1 (no driver attached) isab0: at device 15.0 on pci0 isa0: on isab0 atapci0: port 0x2c00-0x2c0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2c00 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x00 err=0xff lsb=0x00 msb=0x00 ata1-slave: stat=0x00 err=0xff lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x0 ata1: [MPSAFE] pcib2: on acpi0 ACPI PCI link initial configuration: \\_SB_.INA3 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.4.0 \\_SB_.INB3 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.4.1 \\_SB_.INA3 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.4.2 \\_SB_.INB3 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.4.3 \\_SB_.INA4 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.5.0 \\_SB_.INB4 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.5.1 \\_SB_.INA4 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.5.2 \\_SB_.INB4 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.5.3 \\_SB_.INA5 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.6.0 \\_SB_.INB5 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.6.1 \\_SB_.INA5 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.6.2 \\_SB_.INB5 irq 0: [ 5 10 11 15] 0+ low,level,sharable 3.6.3 pci3: on pcib2 pci3: physical bus=3 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0xabfa (0) atkbd: failed to reset the keyboard. kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: failed to reset the aux device. ppc0: using extended I/O port range ppc0: SPP ppc0: port 0x778-0x77d,0x378-0x37f irq 7 drq 0 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 863934643 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached GEOM: new disk idad0 ata0-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata0-master: setting PIO4 on ServerWorks ROSB4 chip acd0: CDROM drive at ata0 as master acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/32 s:32 l:142245088 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure idad0s1, start 16384 length 72829485056 end 72829501439 GEOM: Configure idad0s1a, start 8589934592 length 1073741824 end 9663676415 GEOM: Configure idad0s1b, start 20401094656 length 2147483648 end 22548578303 GEOM: Configure idad0s1c, start 0 length 72829485056 end 72829485055 GEOM: Configure idad0s1d, start 0 length 8589934592 end 8589934591 GEOM: Configure idad0s1e, start 9663676416 length 8589934592 end 18253611007 GEOM: Configure idad0s1f, start 18253611008 length 2147483648 end 20401094655 GEOM: Configure idad0s1g, start 32212254720 length 40617230336 end 72829485055 GEOM: Configure idad0s1h, start 22548578304 length 9663676416 end 32212254719 Mounting root from ufs:/dev/idad0s1a start_init: trying /sbin/init nd6_setmtu0: new link MTU on fxp0 (1024) is too small for IPv6